Remote Pro RPC428 Garage Door Remote Specifications
| Remote Dimensions | 7.1 x 3.3 x 1.4(cm) |
| Remote Weight | 40g |
| Manufacturer | Wholesale Garage |
| Made To Suit | ET Doors / Sunda / ACDC |
| Model Number | WGC428, RPC428 |
| Batteries Included | Yes |
| Battery Type | 27A 12V Alkaline Battery |
| Warranty | 1 Year |
Remote Pro RPC428 Aftermarket Garage Door Remote Compatibility
This RPC428 garage door remote replacement is compatible with RemotePro RPC428 systems. If your current remote has RPC428 written on the front, this remote will program and operate exactly the same.
Whilst this remote may look similar to other black sliding cover remotes in the industry, this is not a ‘universal’ garage door remote.
See the full range of Remote Pro Aftermarket Garage Door and Gate Remotes here
RemotePro RPC428 Aftermarket Garage Door Remote Features
With a black casing complemented by a sturdy metal trim, these remotes are built to last. The sliding cover protects the buttons from dust and accidental presses, helping prolong the lifespan of the remote. Its compact design makes it practical and easy to carry without being bulky or cumbersome. This four-button, 4-channel remote allows you to control multiple garage doors or gate systems from one device, offering the same functionality and reliability you would expect from the RPC428 model. You can replace your old or lost remote without paying extra purely for branding.
ET Door, ACDC, Sunda Garage Door Remote
ACDC ROLLER-GLIDE – Remote Coding Instructions
- Remove the white plastic light diffuser. Be careful, there may be a push button attached.
- Press and hold the desired button on the remote for 2 seconds.
- Wait for 2 seconds.
- Press and hold the same button again for 2 seconds.
ACDC POWER-GLIDE & EURO-GLIDE – Remote Coding Instructions
- Press and release the LEARN button. A dot will appear in the corner of the LED display.
- Press and hold the desired button on the remote for 2 seconds.
- Wait for 2 seconds.
- Press and hold the same button again for 2 seconds.
- The LED dot will flash, then turn off to confirm coding.
- Repeat for any additional remotes.
NOTE: Only one button per remote can be stored for these models. Other buttons can be used for gates, lights, etc.
ACDC SLIM-GLIDE – Remote Coding Instructions
- Remove the light diffuser cover.
- Press the K1 button on the control board. The coding light will come on.
- Press and hold the desired remote button for 2 seconds. The coding light will turn off.
- Wait for 2 seconds.
- Press and hold the same button again for 2 seconds.
- The coding light will flash 8 times, then turn off, confirming success.
- Repeat for additional remotes.
NOTE: The Slim-Glide stores up to 20 remotes.
ACDC GL24 – Remote Coding Instructions
- Press and hold the P2 (MEMO) button. LED L4 will flash slowly.
- While holding P2, press and hold the desired remote button.
- Continue holding P2 until L4 begins flashing again.
- Release the P2 button. LED L4 will keep flashing.
- Within 15 seconds, press the same remote button again.
- LED L4 will stay lit for 2 seconds to confirm coding.
NOTE: You cannot code a button already stored. If you try, the LED will turn off, and coding will fail.
Release P2 to restart the process.
Reviews
There are no reviews yet.