Remote Pro RPC301 Garage Door Remote Specifications
| Remote Dimensions | 7.1 x 3.3 x 1.4(cm) |
| Remote Weight | 40g |
| Manufacturer | Wholesale Garage |
| Made To Suit | FAAC |
| Model Number | WGC301, RPC301 |
| Batteries Included | Yes |
| Battery Type | 27A 12V Alkaline Battery |
| Warranty | 1 Year |
Remote Pro RPC301 Aftermarket Garage Door Remote Compatibility
This RPC301 garage door remote replacement is compatible with RemotePro RPC301 systems. If your current remote has RPC301 written on the front, this remote will program and operate exactly the same.
Whilst this remote may look similar to other black sliding cover remotes in the industry, this is not a ‘universal’ garage door remote.
See the full range of Remote Pro Aftermarket Garage Door and Gate Remotes here
RemotePro RPC301 Aftermarket Garage Door Remote Features
With a black casing complemented by a sturdy metal trim, these remotes are built to last. The sliding cover protects the buttons from dust and accidental presses, helping prolong the lifespan of the remote. Its compact design makes it practical and easy to carry without being bulky or cumbersome. This four-button, 4-channel remote allows you to control multiple garage doors or gate systems from one device, offering the same functionality and reliability you would expect from the RPC301 model. You can replace your old or lost remote without paying extra purely for branding.
RPC301 Programming Instructions
Programming Your Gate Remote
- Open the motor/control panel. Locate the motor/control panel, which will either be on the gate motor or inside a box mounted to a wall near the motor.
- Locate the receiver board. Once the cover is removed, find the receiver board. This is a small circuit board attached to a larger circuit board.
- Identify the learn button. After locating the receiver board, identify the learn button (refer to the image for guidance).
- Press the learn button. Press and release the learn button. A red light will illuminate for 10 seconds.
- Program the remote. Press and hold the button on your new remote that you want to use to control the gate for 2-3 seconds. The light on the receiver will flicker, indicating the remote has been learned.
- Test the remote. Ensure your new remote operates the gate correctly.
Program additional remotes. If you have additional remotes, repeat steps 4-6 for each one.
Alternative Programming Method
- Press the + or Logic button located on the right of the motor.
- Press the setup button while holding the + or Logic button. The Radio 1 LED will start to flash.
- Release both buttons. Then, press and hold the button on the new remote that you wish to use to operate the door. Release the remote button once the Radio 1 LED stops flashing.
- Test the remote. Ensure the remote operates the door correctly.














Reviews
There are no reviews yet.