The use of remote controls is convenient and saves time for opening gates and garage doors, especially if you have to do it every day. The compactness of the device allows you to carry it in your pocket so that the remote control is always at hand. Chamberlain Group Inc (USA) manufactures automation for gates and doors of all types and sizes, and their remote controls are equipped with modern technology and stylish design. At National Garage you can find a genuine Chamberlain garage remote that fully meets your requirements.
Miniature 3-channel Chamberlain remote controls are designed for operating 1 to 3 automatic garage door drives. You only need to press the button corresponding to the desired opener.
Signal transmission safety is ensured by a multi-stage verification system. Each remote has its own unique codes, which are different for each channel (button). The drive accepts commands only from that remote control and that corresponding channel, the codes of which are stored in the memory of the drive’s electronic board.
Chamberlain remotes can also control drives from other manufacturers. If the remote control is lost or stolen, Chamberlain also provides replacement remotes. Before use, it is necessary to reprogram the security system in order to delete and replace the existing data. After programming, the remote control can open and close the garage door up to three cars away.
The remote can also be programmed to turn on the garage lights without actually opening the door. All remotes are shipped with a replaceable lithium battery with an operating life of up to five years.
Chamberlain remote controls are popular for their intuitive control scheme and streamlined design. National Garage works directly with garage door automation manufacturers to offer garage door openers, remote controls and other accessories with a manufacturer’s warranty. Moreover, we offer Chamberlain remotes at an affordable price with free door-to-door delivery anywhere in Australia.
Explore our catalog and choose from the best!
How to reset the Chamberlain garage door opener remote?
If you need to reset your Chamberlain garage door opener, these simple instructions could breathe new life into your remotes again.
Press and hold the Learn button on the back or side panel of your garage door opener motor unit until the Learn indicator light turns on (approximately six seconds). This will erase all codes stored in the memory. Press and hold the button on the hand-held remote that you wish to program until it activates the garage door (approximately six seconds). The Learn indicator light will turn off after a few moments, indicating that the code has been successfully stored in the memory of your opener. For more information, please consult your owner’s manual for complete instructions and safety information.
How to program a Chamberlain garage door opener remote?
Programming your Chamberlain garage door opener remote may vary slightly depending on the model you have. Another way to program is by following the below steps.
Step 1: Locate the Learn button on the back or side of your garage door opener. This is usually a red, orange, or yellow square button.
Step 2: Press and release the Learn button. The LED light will illuminate solid for 30 seconds.
Step 3: Press and hold the button on your remote that you would like to program to your garage door opener. Release it when the garage door opener motor unit’s lights blink.
Step 4: If the lights on your motor unit do not blink, repeat steps 1-3 until they blink indicating that you have successfully programmed your remote control transmitter to your garage door opener.
If you have any questions about programming Chamberlain garage door opener remotes, please consult your manual for complete instructions and safety information or contact us for assistance.
How to program a remote to the Chamberlain garage door opener?
To program the remote control of your garage door opener:
Press and release the learn button on the overhead garage door opener unit. The indicator light will glow steadily for 30 seconds. During this 30 second time period, press and hold the button on the hand-held remote. After the button has been pressed, the learn indicator light will flash slowly. Within 30 seconds of pressing the remote control button, press and release the learn button again. The learn indicator light will go out. The new code has been learned by the opener!
How to connect the remote to the Chamberlain garage door opener?
To connect a remote to your Chamberlain garage door opener:
Step 1: Locate the Learn button on the garage door opener. It is normally found on the back or side unit of the motor. The button will be up inside a small hole or recess in the motor housing. It is usually a red or purple square button. You might need to use a ladder or step stool to reach it.
Step 2: Press and hold the learn button until you see the indicator light flash or turn on (usually takes 6-7 seconds). Release the button as soon as this happens. This process clears any previous remote connections.
Step 3: Press and hold either the remote button until you see the indicator light flash or turn it on again (usually takes 6-7 seconds). Release the remote button as soon as this happens. Your remote is now connected to your garage door opener.
Repeat these steps for any additional remotes you want to connect to your garage door opener.
How to install a Chamberlain garage door opener remote?
Chamberlain garage door opener remotes are some of the best on the market. Before you can use these features, however, you have to install your remote. Thankfully, a remote control system installation is relatively painless and can be done by most people in a matter of minutes. Here’s our quick guide to help you install your Chamberlain garage door opener remote successfully:
Step 1: Program the remote control to the motor unit. Remove the light lens cover by pressing the tab on the bottom section of the cover and pulling it straight down. Locate the “learn” button and press it until you see the learn indicator light turn on. This takes approximately six seconds. Press and release the button on your remote control within 30 seconds of pressing the learn button on your motor unit. The learn indicator light will go out, indicating that you have successfully programmed your chamberlain garage door opener remote. If you accidentally press and hold the button for more than three seconds, you will need to start over from step one.
Step 2: Enter your personal four-digit code into the wireless keypad. Press and hold both arrows at once for three seconds until all of the lights come on briefly. Enter your personal four-digit code without pressing any other buttons in between digits. The light will flash to confirm if you entered your code correctly or need to try it again.
How to change the battery in the Chamberlain garage door opener remote?
Open the battery compartment on the back of the remote using a small screwdriver. Remove the old battery and replace it with a new one.
Place the battery compartment back onto the remote, and press down until you hear a click to lock it into place.