Volkswagen Car Key Housing Replacement Specifications
| Manufacturer | Auto Openers |
| Made To Replace | Volkswagen |
| Model Number | AOVW-HK01 |
| Compatible Models | RPKVW-KS13 |
| Keyblade Model | HU75 / HU-HAA |
| Case Dimensions | 5.5 x 3.4 x 1.6 (cm) |
| Case Weight | 29g |
| Genuine / Aftermarket | Aftermarket |
Volkswagen Car Key Housing Replacement Compatibility
This Auto Openers AOVW-HK01 will replace your old and worn-out car key blade on an old Volkswagen car remote. Below are some of the Volkswagen car models that use car remotes compatible with this key blade housing. However, please ensure that your car remote and buttons look the same as pictured.
- Amarok
- Beetle 2003-2011
- Bora 1999-2005
- Caddy 2004-2010
- Cross Golf 2006-2007
- Eos 2006-2009
- Golf 2004-2008
- Jetta 2004-2009
- Passat 2004-2005
- Polo 2002-2009
- Sharan Transporter Van
- Touran 2003-2009
- Individual 2004-2008
If you are not sure if this will suit, please send us a photo of your car remote so we check for you. Click here for our contact us page.
How Do I Replace My Volkswagen Key Blade?
Replacing the key blade on your Volkswagen car remote is very simple and can be done by anyone. You only need a small, flathead screwdriver (or similar tool) and 1 minute.
1. Press the button to open the Volkswagen key blade.
2. Gently pull the top half (referred to as AOVW-HK01) of the case away from the bottom half. You might find it easier to pull the AOVW-HK01 portion down and away, rather than pulling both pieces horizontally.
3. Open both your new and old bottom case, then transfer the battery and circuit board to the new case.
4. Seal the bottom case back up, then slot it into the AOVW-HK01 key blade holder.
5. Test the operation of the car key! You will need to have your new key blade cut by an automotive locksmith.
What Is Not Included?
This Auto Openers AOVW-HK01 is a replacement case with a blank key blade only. If you require the bottom button portion instead, please see AOVW-CB01. For a complete case, please see AOVW-CK01.
The AOVW-HK01 does not include the car key internals, such as the circuit board or transponder, nor does it include the bottom half of the remote case. This listing is only for the top half of the case, with a blank key blade.
National Garage Remotes & Openers distributes automotive keys, remotes and casings which are compatible with the vehicles produced by other manufacturers, and which are substitutes for automotive keys, remotes and casings produced by those manufacturers. Except where a product is expressly stated to be a “genuine” product, our products are not produced by and are not authorised, endorsed or approved by these other manufacturers.
Reviews
There are no reviews yet.