Description
Jeep Car Key Case Replacement Specifications
| Manufacturer | Auto Openers |
| Made To Replace | Jeep, Chrysler, Dodge |
| Model Number | AOCH-CK07 |
| Compatible Models | RPKCH-KS40Hno SK-CHR-111 RS-CHR-061 |
| Key Blade Model | Y171P / BY171P |
| Case Dimensions | 8.9 x 4.6 x 2 (cm) |
| Case Weight | 29g |
| Genuine / Aftermarket | Aftermarket |
Jeep Car Key Case Replacement Compatibility
This Auto Openers AOCH-CK07 will replace your old, worn-out Jeep, Dodge or Chrysler car key case and shell. Below are some of the models that we have identified to use this car remote.
As there is a large number of variations for this car remote, please ensure you select the correct button configuration and ensure your car key blade looks the same as pictured.
Chrysler Models
- 2011-2014 Chrysler 200
- 2010 Chrysler 300
- 2007-2010 Chrysler Sebring
- 2006-2009 Chrysler PT Cruiser
- 2004-2008 Chrysler Pacifica
- 2007-2010 Chrysler Sebring
- 2009-2012 Chrysler Town & Country
Dodge Models
- 2014 DODGE Avenger
- 2008-2012 DODGE Challenger
- 2008-2011 DODGE Charger
- 2011-2012 DODGE Durango
- 2008-2012 DODGE Grand Caravan
- 2009-2010 DODGE Journey
- 2009-2010 DODGE Ram 1500
- 2009-2010 DODGE Ram 2500
- 2009-2010 DODGE Ram 3500
- 2009-2010 DODGE Ram 4500
Jeep Models
- 2008-2010 JEEP Commander
- 2008-2013 JEEP Grand Cherokee
- 2014-2019 JEEP Cherokee
If you are not sure if this will suit, please send us a photo of your car remote so we check for you. Click here for our contact us page.
How Do I Replace My Jeep Key Case?
Replacing the buttons on your Jeep, Chrysler or Dodge car remote is very simple and can be done by anyone. You only need a small Phillips head screwdriver (or similar tool) and 1 minute.
1. On the front of your remote, slide the button and pull out the key blade.
2. Once the keyblade is removed, you can see the key blade slot on the left and a small tab on the right hand side of the key case. Press the keyblade into the small tab and hinge the key case open.
3. Remove the rubber case over your circuit board.
4. Transfer the circuit board and transponder into the new key case.
5. Replace the rubber cover and click the case back together.
6. Test the operation of your new car key!
What Is Not Included?
This Auto Openers AOCH-CK07 is a replacement case, blade and buttons only. This product will include a key case shell with a blank blade and buttons.
The AOCH-CK07 does not include the car key internals, such as the circuit board or transponder. This product is not a functioning car key remote.
National Garage Remotes & Openers distributes automotive keys, remotes and casings which are compatible with the vehicles produced by other manufacturers, and which are substitutes for automotive keys, remotes and casings produced by those manufacturers. Except where a product is expressly stated to be a “genuine” product, our products are not produced by, and are not authorised, endorsed or approved by these other manufacturers.