Toyota Replacement Car Key Specifications
| Manufacturer | Auto Openers |
| Made To Replace | Toyota |
| Model Number | AOTY-R01 |
| Compatible Models | RPCKTO-KS81 RCG08 |
| Frequency | 303MHz |
| Case Dimensions | 6 x 3.5 x 1.5 (cm) |
| Case Weight | 19g |
| Genuine / Aftermarket | Aftermarket |
Toyota Replacement Car Key Compatibility
This Auto Openers AOTY-R01 will replace your old and worn out Toyota car key. Below are some of the car models we have identified that use this car key.
However, please ensure that your car key and buttons look the same as pictured. If possible, please also ensure your car key is the same frequency as listed.
- Avalon (MCX) – Conquest, CSX 04/2000 – 06/2005
- Camry (ACV36) – Alitise, Ateva, Sportivo 09/2002 – 06/2006
- Camry (MCV36) – Alitise, Ateva, Sportivo 09/2002 – 06/2006
If you are not sure if this will suit, please send us a photo of your car remote so we check for you. Click here for our contact us page.
How Do I Program My Toyota Car Key?
The steps are different for the Toyota Camry and Avalon car models so please make sure you follow the correct steps.
Please note: Remotes cannot be programmed with the valet key.
Camry:
1. Sit in the vehicle with the doors closed and ensure you have all remotes that you would like to work with the vehicle and the key
2. Ensure headlights are off.
3. Insert key into the ignition and turn the key quickly from the ACC position to the ON position 3 times and leaving the key in the ON position the third time – this needs to be completed in 5 seconds or less.
4. PROG will appear on the clock display
5. Press a button on the remote and the hazard lights will flash to confirm coding – press a button on each additional remote to also code these in
6. Remove key and test remotes
Avalon:
1. Sit in the vehicle with the doors closed and ensure you have all remotes that you would like to work with the vehicle and the key
2. Ensure headlights are off and not set to auto.
3. Insert key into the ignition and turn the key quickly from the OFF position to the ON position 3 times and leaving the key in the ON position the third time – this needs to be completed in 5 seconds or less.
4. The security led will illuminate continuously for 5 seconds.
5. While the security led is illuminated, press a button on the remote and the hazard lights will flash to confirm coding – press a button on each additional remote to also code these in
6. Remove key and test remotes
National Garage distributes automotive keys, remotes and casings which are compatible with the vehicles produced by other manufacturers, and which are substitutes for automotive keys, remotes and casings produced by those manufacturers. Except where a product is expressly stated to be a “genuine” product, our products are not produced by, and are not authorised, endorsed or approved by these other manufacturers.
Reviews
There are no reviews yet.