Elsema KEY301 Remote
1x Genuine Elsema KEY301 Remote
1x L1325 Alkaline Battery
Easy To Read Instructions
Elsema KEY301 Remote Features
The KEY-301 remote control has one button, which will allow you to code this remote control into a door or gate opener. The Elsema KEY301 remote control is a smaller, keyring version of the Elsema FMT-301 remote control. Operating in the 27MHz band, the KEY series achieves the highest possible standard of performance by using a crystal-controlled, frequency modulated (FM) radio signal.
Elsema KEY301 Remote Programming Instructions
Remote to Remote or Remote to Receiver Programming
Open your old remote and set the dip switches in your new remote control to exactly what your old remote is set to. Reverse the code (Dipswitch 12 in the ATA would be the position of dipswitch 1 in your Elsema remote, 11-2, 10-3, etc) if your old remote control is ATA branded. If you do not have an old remote control, you will need to find the receiver in your garage or gate motor to find what code you need to put into your new remote control. Again, if your garage door motor is ATA you will need to reverse the code.
Transferring Code From a 2/4 Button Elsema to a Elsema KEY301 Remote
Open your old remote and set the dip switches in your new remote control to exactly what your old remote is set to. As the multi button Elsema remote controls only have 10 switches, simply set 11 and 12 in the single button Elsema remote to ‘up’, or ‘on’.
Elsema KEY301 Compatibility
The Elsema KEY-301 remote control will suit garage door openers operated by one of the below remote controls. Please note that when changing from a two or four button Elsema remote control to a single button Elsema remote, you might need to change the code found inside your garage door or gate opener as well as the code inside the remote control. This is also suitable for QuikCorp’s range of Quik Spray hose reel systems using Elsema Remote controls.
Compatible Remote Controls