The B&D Roller Door Opener Includes
1x B&D “Power Drive” CADPD Roller Door Opener
2x B&D TB6 Keyring Transmitters
1x WTB6 Wireless Wall Button
1x iSeeAll SmartPhone Kit
7 Year Warranty
B&D Roller Door Opener Features
The B&D CADPD will suit any residential roller door made in Australia or New Zealand up to 16.5m². All door in Australia and New Zealand have a standard drum wheel size that Australian openers can fit into. Some older Gliderol motors had a recessed drum wheel that the CADPD’s tines cannot reach, however, you can easily extend the tines to help suit these doors.
The CADPD features bright LED lighting with the ability to fit into tight jobs, with a sideroom requirement of 45mm. The included TB6 remote control features a rolling code encryption called TriTran+ Enhanced, which generates a new code each time the button is pressed from trillions upon trillions of possibilities.
By transmitting across three frequencies, the TB6 all but eliminates interference problems, meaning your garage door will open with every press of the button. Due to the remotes high security, only your garage door remotes will ever open your gate or door preventing code grabbing devices from ‘replaying’ the code to open your garage door.
| Rated Door Area
| Min Side Room
| Peak Pulling Power
|Motor Type||24V d.c. Permanent Magnet|
|Door Travel Speed||130mm/sec
|Remote Frequency||FM 433.92|
|Lighting||6x UltraBright LED’s|
|Warranty||7 Year / 20,000 Cycles
- Your B&D CADPD opener installed by a B&D or ATA technician;
- Serviced 12 months after installation;
- Serviced every 24 months thereafter
- Receipts for the initial installation, as well as the 12 and 24 month services
In the event of motor failure, you would need to engage the installer (at your cost) to diagnose the unit with a specialized PG3 programmer to download the system information to be sent to us.
Once verified as a warrantable claim by the installer, we fill out warranty claim paperwork to send to ATA/B&D. If they accept the claim (timeframe unknown) they will send a new unit to us, to send to you. The manufacturer does not want to send a replacement unit direct to the customer (you).
If you are looking to perform an DIY installation, we highly recommend the Auto Openers range of roller door openers. Auto Openers support DIY Australian handymen and are one of the last Australian owned garage door automation brands on the market.